Simple Steps to a Better Evaporative System:
Feeling warm even when your Evaporative System’s fan had been attuned to the highest speed? This might be a sign that you need Evaporative System Servicing Adelaide. Not to worry! Servicing an evaporative system is a fairly simple task if you have the correct guides. Your evaporative system will need to be serviced about twice every season or when it doesn’t function at optimum levels.
How can you spot an underperforming Evaporative System?
If you continuously think that your room or house is not cool enough even when the evaporative system is running on its highest speed. Don’t immediately assume that your evaporative system has broken down. This might occur due to the size of the evaporative system. In fact, the cooling area for it is proportional to its size. Thus, you should always check with the retailer for the right evaporative system size. Also, replace the evaporative system with bigger fans or more water pads for better performance. This is an essential step of Evaporative System Servicing Adelaide.
Water pads are vital parts of an evaporative system and as a result, need to be checked & changed occasionally. Clogged filters prevent optimum water absorption, as a result, decreasing the performance of your evaporative system. According to manufacturers, increasing the frequency of changing water pads improves the performance of your evaporative system.
You might also drop a water treatment tablet into the tank of your evaporative system. Treated water obviously means cleaner water. The cleaner water reduces the formation of debris & sediment on the water pads. Treating the water is another essential step of Evaporative System Servicing Adelaide.
Additionally, evaporative system fans that are not blowing the right way could be caused by reasons like V-belts which are too tight or low amperage. From time to time during operation, you may observe a slow flow of water to water pads. This is a sign of clogged filters as filters need to be frequently washed to get rid of corrosion.
A Step By Step Guide for Basic Evaporative System Servicing in Adelaide:
• Firstly, shut off the power & water supplies before you start with anything.
• Secondly, remove the water pads & check if they are in healthy condition. Replacement of water pads helps to increase the evaporative system efficiency a great deal. You might also want to clean up the side panels, water tubes and water tank in the evaporative system to throw out soil, sediments, debris or even salt, formed over a long period of time. A biocide or a vinegar and water solution is awesome to be used for proper cleaning.
• This is a very important of Evaporative System Servicing Adelaide. Thirdly, check the water pump to make sure that it is clean & debris-free. This is vital for proper water distribution. Remove the tray placed at the bottom of the evaporative system. Wash it and thoroughly check if the tray is in healthy condition.
• Fourthly, it is also essential to check the tension of the V-Belt. Always, have a 1- 1.5-inch allowance to minimize tension. Aside from the V-Belt, also check the amperage level. If the amperage of the evaporative system is lower than the one mentioned on the nameplate amperage, adjust the variable pitch motor pulley for higher amperage which helps to increase the blower speed.
• Fifthly, Evaporative System Servicing Adelaide involves lubrication of the blower wheel with the evaporative system oil for additional efficiency. Rotate the wheels and observe if it is blowing in the right direction & speed.
• Finally, fill the evaporative system with water. Do make sure that the water level is mildly below the top of the tray and regulate the float arms if the water spills.
If the schedule of your Evaporative System Servicing Adelaide states it is not yet time for servicing but you believe it’s not performing up to par, you may need additional servicing. If your evaporative system does not ever seem to be adequately cooling your room, you may want to check to see if your water evaporative system is designed to merely cool a small area. Evaporative system sizes vary and every product should advise you of the approx square footage the unit will be able to cover. If your unit is too small for your room you have it in, it will not be very effective.
Your use & care guide that comes with your evaporative system should indicate the frequency with which you have to change your water pads. The absorbent water pads which are contained in your evaporative system are a vital component for optimal performance. There might be a specific pad which is suggested in your guide for Evaporative System Servicing Adelaide that will perform better than others.
Another common issue with water evaporative systems is corrosion, calcium buildup or some other sediment issues clogging the components inside your unit. Plain household vinegar or a water treatment product can help remove the calcium build up and aid your evaporative system run much more efficiently. There are high-end units which have fewer issues or chances of corrosion & rust as well because of the components contained.
A summary of Evaporative System Servicing in Adelaide:
• Turn off the power, unplug your unit & disconnect the water supply.
• Examine all the areas inside the unit for corrosion or wear and tear along with checking the water pads & replacing them, if needed. Vinegar or a commercial product can be used at this time also. Examination of the pump, blower, and v-belt are a good idea.
• Lubrication of the blower wheel will keep your unit functioning properly. Follow all set up guide and instructions after you inspect the unit before turning it on.
• If you are not mechanically sound, hire a professional for your Evaporative System Servicing Adelaide.
For servicing and Evaporative System Installation in Adelaide, make contact with the Trade Focus Heating and Cooling! You can also check our air conditioning repair in Adelaide reviews for a better idea. Sp next time you need a professional for doing air conditioning maintenance in Adelaide, give us a tinkle!